Page
12bf
in Providence, Rhode Island, Architectural Iron Company took the pieces of the sole remaining
steel and cast iron spandrel panel and created seventeen new ones. Scroll down for more...
The above photo
shows Architectural Iron Company's reconstruction of
the only components left of one of seventeen original spandrel panels.
Architectural
Iron Company then created and submitted this shop drawing for approval,
which incorporated a simple but foolproof system for hanging these panels,
each of which is 5'-4 1/2" x 4'-5 1/2" and weights 519 pounds.
which incorporated a simple but foolproof system for hanging these panels,
each of which is 5'-4 1/2" x 4'-5 1/2" and weights 519 pounds.
Here
a complete spandrel panel hangs in our fabricating shop before being packed
up for shipment.
After installation, the project engineer e-mailed us: "They are all hung, they all
fit great and the owner loves the way they look. Thank you for all your help!!!".
After installation, the project engineer e-mailed us: "They are all hung, they all
fit great and the owner loves the way they look. Thank you for all your help!!!".
Featured Castings:
 |
AIC 716
Providence Side Molding 2 3/4" x 45 1/2" x 4 7/8" 29 lbs. |
$142.50 |
  |
 |
AIC 717
Providence Top Molding 2" x 18 1/8" x 1 3/8" 9 lbs. |
$137.50 |
|
ALL
PICTURES AND DRAWINGS APPEARING ON THIS WEB SITE ARE THE COPYRIGHTED PROPERTY
OF ARCHITECTURAL IRON COMPANY
AND MAY NOT BE USED BY ANY PERSON FOR ANY REASON WITHOUT PERMISSION UNLESS THE PRODUCT DEPICTED IS SPECIFIED AS
BY: Architectural Iron Company
Milford, PA 18337
(800) 442-IRON
AND MAY NOT BE USED BY ANY PERSON FOR ANY REASON WITHOUT PERMISSION UNLESS THE PRODUCT DEPICTED IS SPECIFIED AS
BY: Architectural Iron Company
Milford, PA 18337
(800) 442-IRON
Visits since: 4/14/07
Updated: 4/14/07
